Cessna Seat Roller Kits
The Cessna seat roller kits are not serial number specific, as the type of seat installed in an aircraft is optional when the aircraft is ordered from the factory. A common seat configuration is the pilot seat being “articulating” or “infinitely adjustable” while the copilot seat is the “standard” or “vertically adjustable” style. The most positive way to ensure that you are choosing the proper seat kit for your aircraft is to measure the rollers.
|SEAT-KT-1||Two adjustment crank handles identify this seat which adjust the backrest angle.||Cessna Single-Engine (1963–1986), some 336–337 Series w/ Infinitely Adjustable/Articulating Seats||8 Washers, 4 Rollers (1-3/8″), 4 Bushings
*Same components as (4) Cessna 1714000K200 kits
|SEAT-KT-2**||This seat is identified by one or no adjustment crank handles. The seat back angle is adjusted with a lever on the side of the seat back.||Cessna Single-Engine (1963–1986), some 336–337 Series w/ Standard/Vertically Adjustable Seats||8 Washers, 4 Rollers (5/8″), 4 Bushings
*Same components as (4) Cessna 1414100-212 kits
|SEAT-KT-3||A welded steel tubing seat frame easily identifies these seats.||Cessna 150–152 Series, All Cessna Single-Engine (up to 1963), some Cessna Twin-Engine w/ All Seats||4 Rollers (7/8″), 4 Bushings|
**Cessna aircraft manufactured in 1964 and 1965 had a spool shape roller with a smaller bushing. Use SEAT-KT-2 to replace this style roller. The complete kit must be used, as the bushing size is different.